Stainless Steel slide - Lock open and closed - Full Extension

Manual locking system Lock open: when extended, press the lock to fold it up. Locking closed: when folded, the lock must be operated to unfold. Locking open and closed: when folded, the lock must be operated to unfold and when extended, the lock must be pressed to fold. In most cases, only a latch slide is used to lock the entire drawer. This makes assembly and operation easier. If you are installing in vehicles, please consult us if you plan to use locking slides. The presence of locks makes certain short lengths impossible to manufacture. In addition, some standard drillings may not be possible. We do not recommend the use of locks for vertical installation (sash type). Double development (DD) The slide opens on both sides. This makes it possible to create transfer locks, for example. The DD option is not compatible with any locking system. High temperature use (oven type) This model can be used in high temperature environments up to 250°C. However, some adaptations are necessary: - freedom of assembly to allow expansion of the elements without blocking the slide, - use high temperature lubrication - remove all plastic elements. These adaptations to the slides must be made in the factory. It is therefore important to inform us when requesting a quotation and to allow for a manufacturing time. Modification of the standard Development: This model can be increased by 10% or decreased. An increase in development reduces the maximum permissible load. Custom lengths and strokes. Customised drilling pattern Other surface treatments (corrosion, hardness) Vertical mounting (guillotine type)